Heavy Duty 9" Housing

9-Plus also offers a Heavy Duty Housing patterned after the later-style Ford 9-inch unit. However, the 9-Plus has been specifically formed to accept 3-inch O.D. tubes that will slide right in. The original Ford housings required a 3-1/4" diameter tube which is not compatible with many of the commercially available brackets commonly welded to the axle tubes. The 9-Plus Heavy Duty Housing is designed to permit the axle tubes to go into each side up to four inches. Slots are machined in the housing ends to provide additional welding contact. This housing is made of premium forming steel for wrinkle-free forming. This 9-Plus Housing is made of a slightly thicker gauge of steel than a stock 9-inch housing for more strength and stiffness, and a better base for welding brackets to the housing without distortion. This housing is commonly used in high powered street machines and professional racing applications.

Allstar Performance Heavy Duty 9" Ford Floater Housing Assemblies (Bare Housing), 60" Centered

Heavy duty housings are jig welded for alignment and are furnished with vent, fill and drain plugs installed. Assemblies include housing, steel or aluminum 8-bolt 5x5 hubs, solid axles, Wilwood .810" or 1-1/4" rotors, bearing and seal kit, and rotor bolts. Gun drilled axles are available at extra cost. Custom housings are also available with new center sections, stock type 9" flanges and more.

Allstar Performance Heavy Duty 9" Ford Floater Housing Assemblies (Bare Housing), 60" with 2" Offset

Heavy duty housings are jig welded for alignment and are furnished with vent, fill and drain plugs installed. Assemblies include housing, steel or aluminum 8-bolt 5x5 hubs, solid axles, Wilwood .810" or 1-1/4" rotors, bearing and seal kit, and rotor bolts. Gun drilled axles are available at extra cost. Custom housings are also available with new center sections, stock type 9" flanges and more.

Allstar Performance Heavy Duty 9" Ford Floater Housing Assemblies (Bare Housing), 61" Centered

Heavy duty housings are jig welded for alignment and are furnished with vent, fill and drain plugs installed. Assemblies include housing, steel or aluminum 8-bolt 5x5 hubs, solid axles, Wilwood .810" or 1-1/4" rotors, bearing and seal kit, and rotor bolts. Gun drilled axles are available at extra cost. Custom housings are also available with new center sections, stock type 9" flanges and more.

Allstar Performance Heavy Duty 9" Ford Floater Housing Assemblies (Bare Housing), 62" Centered

Heavy duty housings are jig welded for alignment and are furnished with vent, fill and drain plugs installed. Assemblies include housing, steel or aluminum 8-bolt 5x5 hubs, solid axles, Wilwood .810" or 1-1/4" rotors, bearing and seal kit, and rotor bolts. Gun drilled axles are available at extra cost. Custom housings are also available with new center sections, stock type 9" flanges and more.

Allstar Performance Heavy Duty 9" Ford Floater Housing Assemblies (Bare Housing), 62" with 1" Offset

Heavy duty housings are jig welded for alignment and are furnished with vent, fill and drain plugs installed. Assemblies include housing, steel or aluminum 8-bolt 5x5 hubs, solid axles, Wilwood .810" or 1-1/4" rotors, bearing and seal kit, and rotor bolts. Gun drilled axles are available at extra cost. Custom housings are also available with new center sections, stock type 9" flanges and more.

Allstar Performance Heavy Duty Ford 9" Floater Housing Assemblies With Aluminum Hubs 62" with 1" Offset

Heavy duty housings are jig welded for alignment and are furnished with vent, fill and drain plugs installed. Assemblies include housing, steel or aluminum 8-bolt 5x5 hubs, solid axles, Wilwood .810" or 1-1/4" rotors, bearing and seal kit, and rotor bolts. Gun drilled axles are available at extra cost. Custom housings are also available with new center sections, stock type 9" flanges and more.

Allstar Performance Heavy Duty Ford 9" Floater Housing Assemblies With Aluminum Hubs 62" with 1" Offset

Heavy duty housings are jig welded for alignment and are furnished with vent, fill and drain plugs installed. Assemblies include housing, steel or aluminum 8-bolt 5x5 hubs, solid axles, Wilwood .810" or 1-1/4" rotors, bearing and seal kit, and rotor bolts. Gun drilled axles are available at extra cost. Custom housings are also available with new center sections, stock type 9" flanges and more.